BeltedGirls.com

Almost everyone has trouble getting the liner attach to stainless steel.
Now I wonder how the manufacturers of bowls, with silicone base attaches them together?

I tested to cut loose the silicone.
No success!
I heat so it bubbles in the silicone and then it come off, but only where it has become so hot.

Can anyone think of how they are doing?

Another option is to use neoprene:

http://www.ebay.com/itm/NEOPRENE-STRIPP ... 2a0e2da3fe

I used 2" wide 1/8" thick neoprene for this project (not shown in pics) :viewtopic.php?f=20&t=409 and I attached it with 3M HS90 spray glue - it ain't coming off

Silicone doesn't breathe, neoprene does. Both can be cleaned, both accept talc, etc.

I used a 100% silicone glue and eventually found a process that works, its not easy though and takes serious skill.

The good news for those who have problems with silicone liner loosen!
Several tried and managed to glue the liner on chastity belts with TEC7!
http://tec7.ie/product/tec7-sealant/