BeltedGirls.com

This is the chastity belt I purchased and received almost 2 weeks ago...
http://www.dhgate.com/sm-sex-toys-stain ... 12e33.html

The seller, Shackle, Ltd. is the one I used. He was very communicative, answering emails within a few hours to a day. Also, he is willing to make adjustments and sell additional parts not listed on the main product listing. I bought a yin chuan (vagina insert) to go with my belt as an after-thought and this seller was eager and very accommodating. He quoted me 21-30 days shipping and the belt arrived in 14 days from HongKongPost (which is ordinarily tediously slow). He also offers free shipping.

Anyways, on to the review of this belt...

WOW! I mean, wow. Beautiful pink silicone liner, unfortunately it is not glued down. However...I discovered that Loctite gel super glue and GOOP gummy silicone adhesive stuff works great. I'll get into that later...

Now keep in mind, chastity belt affecionados, I am NOT A CHASTITY BELT WEARING VETERAN here. Just a regular woman who decided to give it a try. I dunno, I have my reasons and thinking and read this and saw a pic of that...and have been wanting to experience wearing a chastity belt for a few years now. Also, on this one kinky social media website (ain't telling) I always hear these lil subbie princesses whining and moaning about WOE is me, chastity belt wearing is soooooo hard! Well, I wanted to debunk them and I am a "I'm all in" kinda of woman, so firsthand experience is needed. I have looked into Tollyboy, NeoSteel, etc. and did not want to make a $650-$800 investment into something I may not like all that much. Hence, I looked at the sub $200 range. I definitely wanted stainless steel and something I cannot destroy easily to get out of. (I come from a family of tradespeople, yeah, I know tools and picking locks. If I wanted to get out of ANY belt made by mankind, I could, given enough time and the right tools)

Pthbbt! Right out of the package, this belt almost kinda sorta fit me. It has adjusting screws with nuts and the chains are movable side to side and there is 3 holes in the center main front shield right above on the mons venus that can give you more length to the chains. The chains are covered with heat shrink tubing. They are the flat type link. Squished flat or something. Anyways, they are comfy enough as far as wearing chains across your ass goes...

The stainless steel of this belt is around 22-23 standard gauge (I am guessing. I KNOW it is not 20 gauge and it seems a fuzz thick for 24 gauge, maybe its metric, dunno). Given the flimsy feel of this belt, I though, "Oh hell no! This is piddly sheetmetal." And it has adjustment holes drilled center of the waistband nearly all the way around it. You really could adjust this thing from like a 18" waist to a 36" waistline. Well, being older and fatter than in my prime, I adjusted for 29.5" and that gives me about 8.5 inches of overlap of the two belt halves. That is plenty to reinforce that joint and in the center back, it is twice as thick.

The front shield is also this 22-23 gauge stainless steel. It took me about 3 maybe 4 adjustments to bend the shield to match my feminine curve. The shield is long enough that it ends just dead center of the "taint". So when you slide the vagina insertable into the slot, it stops in the right place. (looks like a stack of 4 balls on a rod starting about 1.5" up and its about 6 inches long in total, largest ball feels like 1.25" and the top smallest ball is like .75 inches)

Here is my main complaint: the picture on the website has an auxiliary front shield with little holes drilled in for going pee through. The one that arrived DID NOT. It has 3 slots, The auxiliary shield slides into 2 lockup pins that are excessively long in my opinion. Well, my labia get caught between the auxiliary front shield center slot and the slot on the primary front shield. Yeah, I got nasty pinches twice. I MEAN BAD. The seller says this three slotted aux. shield is the "new model". I bitched about it pinching me ugly bad and he is shipping the "old style" with the center holes like you see in the picture. Well, I haven't gotten it yet. So making due by placing a piece of clear plastic between the aux and main shield. Make sure to tension the auxiliary shield so it lays flat or you will get the ugly pinching. I used a distilled water jug and an X-acto knife to cut a shim to place between leaving about 3/4 inch up from bottom so pee can still drain through but no labia get caught in there.

As of this writing, I have stayed belted 24/7 for 7 days, EXCEPT for 2 hours out 3 days ago to glue down that silicone liner and finished the belt off by filling all the excess holes for adjustments I don't need with stainless steel leather rivets. (use mediums and dont use the backs, just peen over till squished flat) The belt looks pretty neat like that. I also removed 1 link from those twist chains, and I recommend you NOT TRY THAT. That link material is very thick and troubling to open and reclose the links nicely without marring the finish from plier teeth. Because of that, I had to silicone glue the tops of mine because I chewed that top link enough it rubbed me wrong. If you are not handy with tools, OR lack hand strength, get your man to do it. Trust me, had I known what I was getting into, I would have just left well enough alone.

The waistband and front shield are thin enough to flex and bend very easily, so getting the belt and my body into sync was not really that troubling. In fact, the longer I wear this belt, the more comfortable it becomes! I would take any bet that I could wear this belt indefinitely, barring accident, belt failure (like liner comes off, or I have to go into a courthouse or airport). I found I can even douche with the vagina insert in place by using the soft rubber douche bottle nozzle. NOT the hard plastic ones, because you really have to bend and tweak it around to the side. I was afraid of getting TSS from having that vagina insert in for so long, so I make a point to do a thorough personal hygiene routine. I have not had problems going pee, going poo, or douching. Well, douching is not easy, but can be done effectively.

This belt with the vagina insertable is IMPOSSIBLE to get out of. I have tried using lots of body wash and hot water to slither it down my hips and twist the front shield to the side. Not happening if you adjust this belt right.That insert gets about 1/3 of the way out and then you're stuck. It cannot slide up the slot because the slot top with the round hole is up too high and the vagina insert is too long to twist to side and pry it out. AND that bottom ball is just big enough in diameter that you cannot fit anything else in for penetration. (rubber douche nozzle doesn't count in my book because its tiny and totally useless for any pleasurable sensations from it)

I can get this belt front shield far enough away that I can slip at least 3 fingers under it to wash and such. So this belt does not prevent "illicit touching" per se. This belt is 100% effective in preventing vaginal penetration or oral sex unless your man has a 5 inch tongue. If you do, can I borrow him??? . As for clitoral masturbation...I dunno about my fellow ladies out here in chastity-land, but I need more than a few minutes of finger play to get my motor going and having one hand holding the shield away enough so my wrist and fingers are not at a weird angle and pinched is tedious at best. The "flimsy" stainless steel is springy under tension, so my muscles get tired holding it away. So if you can get off before you get tired of holding the shield away, then I guess you can masturbate in this belt.

Personally, grinding against the front shield seems more pleasurable than trying fingers. Just have to be careful because that top enlarged portion of the center slot seems at about the right place to get a clit-pinch if you grind too high up while pushing waistband down. Don't ask me how I know...

This belt is definitely something that gets my heat going. And it is frustrating. And it cost me less than $115 USD. And oh!!! The lockset on this lil devil...

Nothing like it I've seen before. It has this weird long key with a triangular keyway and the brass cynlinder has a side dog that locks it from the side. The barrel of the cynlinder intersects a cutout in the center post. You insert the key from the side. It has a 4 pin tumbler and the last pin is waaaaay deep. So after trying to pick this lock for 45 minutes (I can normally pick a 6 pin cylinder in under a minute and half) I did get the cylinder picked. Unfortunately, I could not turn the side dog that locks into the rear of the massive block of the waistband lock. I bent the tension wrench. It is in a weird location: upper left side of the block so you are fighting your belly and the pressure of the waistband and lockset makes this lockset like a prison lock: massive, easy to pick mechanically, but impossible to turn without the strength of a heavy key.

This lockset gets the PYRA GORGON UNPICKABLE rating due to inability to turn and remove the cylinder. Basically, if you lose the key to this thing (and it ships with 3) going to a locksmith is not going to help you. However, if you did not replace the nuts and small screws with rivets like I did, you can always get a small pair of pliers and remove the nuts and disassemble the waistband and remove the belt without destroying it.

So if I EVER hear any woman crybabying that "OH! I lost the key and have been in this belt for 88 years and I really want to get out..." tripe is full of caca. This belt is easy to remove IF you don't replace those screws with rivets. (yeah, I'm risque like dat. If you installed rivets like I did, just remember....Dremel is your friend. Grind them off.

Last resort: tin snips. The metal is thin enough even a 12 year old girl can cut it. Not only that, but you can probably go to a machine shop with your cut wasitband and have them cut you a new one. There is really nothing fancy to this belt.

And it works nicely if you want be in chastity with a stainless steel metal belt.

Okay. I'm done and I'm sure you are tired of reading!

Ciao.

Pyra G.

Thank you for a very well written and detailed review! Please do keep us updated on how it turns out for a longer wearing duration and how much of a comfort breaker it is in your everyday life. I expect that those steel panties would cause some chafing on parts of your body until you get used to them, am I right?

How do you conceal it with clothing if you do and if it is at all possible? The chains would surely be visible even under clothing? The need to disguise the belt would very much depend on what sort of life you live, like how much you see other people and how much it would matter if they knew about your belt.

The plug, do you wear this for longer periods of time or it is for play only?

If you have any photos of the belt that you want to attach to your post you can do so by editing your original post or by sending the photos to webmaster@beltedgirls.com. I will then add the photos to where you want them. Photos are not really needed but it always helps to show how the belt looks like. The linked DHgate page can suddenly disappear leaving your great review lacking much needed photos. (Such photos would naturally not need to contain yourself in any way if you prefer that. Privacy is important and should be respected.)

Dear Admin,

Thank you for the kind words, questions, and advice. Far be it from me to disobey admins, so I am including some photos/ images with this post. Those images are of my belt right after I got it
This is the chastity belt as the seller SAYS it ought to look...and THIS is what I received, photo taken after I got it kinda sorta fully adjusted to my body... , and As you can see by what was sent, that center slot has a nasty pinch point due to the lack of raw edge lining on the center slot. I am thinking on that and ways to make some sort of edging for it, like longtitudinally cutting a silicone tubing and gluing that on there with the belt sliding into the cut of the tubing.

When I get some photos of me in the belt, I will post them as well so you can see fit and form of this chastity belt. (don't worry, nothing pornographic or revealing of myself, I'm kind of chaste that way...

As of yesterday morning around 6 AM, I removed this belt. Due to the heat, the raw edge of the lower front shield slot, and riding a bicycle on Saturday, I had developed a pressure sore/ blister on my left, outer labia on the lower inside place. It was looking pretty angry, and did not want to risk infection. Chastity belts seem to be a very pleasant place for bacteria and such to grow and fester a skin abrasion. At time of me making this post, it is nearly healed. (I used 15% Lugol's Iodine solution twice daily since)

I was in the belt more or less 24/7 for week, out for a couple hours a few times to make adjustments and glue down the liner, affix permanent peened over rivets for the rear chain mount points, etc. So I must confess, the belt made me hotter, hornier, and ummmm, more focused on my libido and sexual fantasizing than I have been for many months. Well, I'm certain you can connect the dots with that and know that I had to take certain liberties while free. I got it like that since I own my own keys....Anyhoo's....

I mounted the plug to be more or less permanent to the front shield. I did this by putting the auxiliar shield under spring tension, hoping to get a tight fit without a gap that would pinch me. And I created a shim liner to cover up that center slot except for the very bottom inch. The vagina insert has its own hole drilled in that plastic shim, so it cannot slide up and down the slot now. And yes, while belted, the vagina insert was always in. As I said, I am able to slip a thin rubber douche nozzle inside myself to internally cleanse. The vagina insert pretty disallows anything from getting in there, except for the one thin flexible rubber nozzle. I've tried other things with no appreciable success, and zero "pleasure" factor with any of it. Something to do with the depth of lower vagina insert ball, that balls diameter, and how the further I have to squeeze the front shield down and away to get under it for cleaning, the lower it pulls that ball until it pretty much consumes my entire opening size preventing access of anything but the most flexible and small diameter of tubings.

I have worn the chastity belt under dresses, skirts with pleats, and yes, even tight denim skirts and stretch pants. So far, no one has said anything or inquired. Viewing myself in mirror for a 'once over' inspection, it is pretty much unnoticeable except for a tiny telegraphing of some chain line at the very top of my crack where the chains come clear of my crack and veer to either side. The chain has this stupid quarter twist to it or something, so it could lay flatter if I could get the twist out. The front waistband lockset is the real culprit for undetection! It is really clunky. However, again, no real issues.

And if anyone dared ask, I'd tell them I am wearing a chastity belt, and what you see is the waistband (or chain, etc). What of it? I am not really a bashful or timid soul. And I am truthful to a flaw. Most likely, I would give them a knowingly cheesy grin while saying that. Further questioning of anyone I'd simply inform to "google it" for further answers. hahahha

Pyra Gorgon wrote:
Here is my main complaint: the picture on the website has an auxiliary front shield with little holes drilled in for going pee through. The one that arrived DID NOT. It has 3 slots, The auxiliary shield slides into 2 lockup pins that are excessively long in my opinion. Well, my labia get caught between the auxiliary front shield center slot and the slot on the primary front shield. Yeah, I got nasty pinches twice. I MEAN BAD. The seller says this three slotted aux. shield is the "new model". I bitched about it pinching me ugly bad and he is shipping the "old style" with the center holes like you see in the picture.

It looks like it's just wrong shield rather than new model. Maybe seller just don't understand the difference.
Shield with little holes is supposed block access by your or someone's fingers, while "new model" is not. It's called secondary shield and could be optional, but in case of your belt it must be always presented. That's probabaly why they offer your belt "fake" secondary shield, meaning they had to let you choose.

Pyra Gorgon wrote: This lockset gets the PYRA GORGON UNPICKABLE rating due to inability to turn and remove the cylinder. Basically, if you lose the key to this thing (and it ships with 3) going to a locksmith is not going to help you. However, if you did not replace the nuts and small screws with rivets like I did, you can always get a small pair of pliers and remove the nuts and disassemble the waistband and remove the belt without destroying it.

How about this little brass lock connecting the shields together?

@virginitysaving;

It looks like it's just wrong shield rather than new model. Maybe seller just don't understand the difference.
Shield with little holes is supposed block access by your or someone's fingers, while "new model" is not. It's called secondary shield and could be optional, but in case of your belt it must be always presented. That's probabaly why they offer your belt "fake" secondary shield, meaning they had to let you choose.

No. I contacted Shackle, Ltd. and he told me that secondary (i call it an auxiliary shield, same thingie) that initially shipped with my belt is the latest style. HE says that old style was what was pictured. He has sent old one to me. I will have to bend tab and take the D-ring with rear chainset off old one and put on the new shield. No biggie. I have a cold chisel and have access to a vise with brass jaws and a tinner hammer.

I intend to rivet down the 'secondary' plate to the primary front shield, so the additional brass lock on the center front shield will not be needed anymore. I hate that thing; it is bulky and makes a lump in the panties. Dumb place for a padlock, regardless of size in my opinion.

I turned the padlock around so the rear of the post is on the outside surface of front shield and padlock against my skin. In a way, that adds a bit more security because it prevents a swipe down from the top; fingies get hung up on that lock. IT is kind of uncomfortable, but not terribly so.

So if you want, you can do same thing if you buy one of these belts. I took a file and rounded the padlock edges before turning it around. It's just brass, easy to file.

All in all, I think this belt is pretty nice, given its price point and ease of customizing! From what I've seen of Tollyboy, Neosteel, My-Steel, etc. those belts would require some serious machine shop jigs and tooling to fiddle with due to how they are made and thickness of s.s. metal. And if you are paying the price of a used car for one, you certainly do not want to scratch, scuff, or loosen the neoprene or silicone edging on one of those!!!

Also, virginitysaving, that lil brass padlock that locks secondary shield to primary front shield has zero security. I did not bother to pick that one because I know I can with extreme ease. it is not even a challenge to do. You can also cut those off with a pair of side cutters. No, that thing in my opinion is just for show, not for security.

Yes, if that comes off, you can slide the secondary down the rails and take apart the bottom half of the belt. However, you are STILL stuck in the belt because the waistband is still locked around your tummy with that primary lockset. So while you may have gotten temporary access to your delicates, what then? If you do not possess key to your own belt (like I do) now you are really in trouble! You also have to deal with that long vagina insert that is not going to come out even with the two parts separated. (still have to get it out and slide up that slot) You will have a chastity belt that is going to pinch you and will not stay in place and you also have to face the music when your keyholder discovers that you have tampered with your chastity belt. IF your man is the strict type and dedicated to keeping you chastized, I imagine he would take a strap to your ass for making him go out and shop for a new brass luggage lock to replace the one you cut off. (mine would have beat me like a hebrew slave for doing that)

If you hold your own key, why bother cutting it off? Makes no sense and waste of a cute brass luggage lock. Just use your key! LOL

As I said in my review, this belt is not going to keep you from slipping fingers under that front shield and gaining access to the clit. I do all the time. But it is awkward and all it does is frustrate more than satisfy.

Thanks for all the answers!

Pyra Gorgon wrote:I mounted the plug to be more or less permanent to the front shield.

Do keep us updated on how the permanent plugging turns out for longer wear. Permanent plugging is considered to be a fantasy that only takes place in erotic stories.

Pyra Gorgon wrote:I have worn the chastity belt under dresses, skirts with pleats, and yes, even tight denim skirts and stretch pants. So far, no one has said anything or inquired. Viewing myself in mirror for a 'once over' inspection, it is pretty much unnoticeable except for a tiny telegraphing of some chain line at the very top of my crack

Thanks for that. I would think that very few people that would spot that chain line would realize what it signals. It is like a secret handshake between members in the chastity community.

Pyra Gorgon wrote:And if anyone dared ask, I'd tell them I am wearing a chastity belt, and what you see is the waistband (or chain, etc). What of it? I am not really a bashful or timid soul. And I am truthful to a flaw. Most likely, I would give them a knowingly cheesy grin while saying that. Further questioning of anyone I'd simply inform to "google it" for further answers. hahahha

That is great! Why hide if you have nothing to hide? The best way to quiet a curious person is to tell them a truth that will leave them speechless.

Do keep us updated on how the permanent plugging turns out for longer wear. Permanent plugging is considered to be a fantasy that only takes place in erotic stories.

Sure, I will. I really do not understand what the fantasy element of that is. Having the vagina insert in when belted is nothing erotic. Really. What is does do is make the belt more secure and disable aggressive pulling away of front shield and being able to stick anything forbidden up inside. Well, at least on THIS belt, it does. Someone send me a Neosteel, Tollyboy, or My-Steel belt and I'll let ya know what I can get away with and will give you a 100% thorough product test to its effectiveness...

Then again, I am not using a fancy dildo. I am using this...
http://www.dhgate.com/1pc-stainless-ste ... #cps-4-256

Except it does not have the T-handle. It has a groove that slides into front shield slot. Same shape and length and stuff.

(blister has healed now. going to re-belt tonight. I'll keep ya'll posted. )

Pyra Gorgon wrote:I really do not understand what the fantasy element of that is. Having the vagina insert in when belted is nothing erotic.

Erotic or not it is still the stuff(ing) that fantasies are made of. It probably depends a lot on the fantasies of the wearer of such a belt or the reader of such a story.

Pyra Gorgon wrote:blister has healed now. going to re-belt tonight

Have a great time!

Pyra Gorgon wrote:
No. I contacted Shackle, Ltd. and he told me that secondary (i call it an auxiliary shield, same thingie) that initially shipped with my belt is the latest style. HE says that old style was what was pictured. He has sent old one to me.

So, how is this latest style supposed to prevent what the old style is able to? Some people wear belts just for this reason.

Pyra Gorgon wrote: So if you want, you can do same thing if you buy one of these belts. I took a file and rounded the padlock edges before turning it around. It's just brass, easy to file.

All in all, I think this belt is pretty nice, given its price point and ease of customizing! From what I've seen of Tollyboy, Neosteel, My-Steel, etc. those belts would require some serious machine shop jigs and tooling to fiddle with due to how they are made and thickness of s.s. metal. And if you are paying the price of a used car for one, you certainly do not want to scratch, scuff, or loosen the neoprene or silicone edging on one of those!!!

You might want to find a new business of customisation those cheap belts. I agree, that price is amazing vs. what major manufacturers offer. It makes belts available almost for everyone.

Pyra Gorgon wrote:You also have to deal with that long vagina insert that is not going to come out even with the two parts separated. (still have to get it out and slide up that slot).

This plug might not be an option by the obvious reason