Chinese made C.B. (SS florentine-style, pair single chains)

[Pyra Gorgon]

Thigh bands are BDSM gear. Might as well add an armbinder in there while you're at it.

Not really, if they are used to prevent side access. It basically depends on situation when you might want to push the shield to the side. I doubt you would be trying to do it all the time.

Started a new thread so we can hash this one out, Virginitysaving. Let's try and keep our forum threads on track rather than totally derailing. Let's make new topics for things as they arise?

Will gladly debate this point...in its own thread.

[virginitysaving]

Since you don't wear the belt for few days, could you provide lock details?

[Pyra Gorgon]

Image showing why this front shield pinches/ scissors so badly

WARNING! Graphic. Do lookie if seeing parts of female anatomy peep through metal is disturbing.

Putting a plastic shim beneath creates a stink point because it wicks urine up between them and it cannot be wiped clean without unlocking and taking parts apart.

NOT having shim causes a scissor point on those two sharp and thin metal plates.

[Pyra Gorgon]

LOCKING SYSTEM of CHINESE CHASTITY BELT

For Virginitysaving...

[virginitysaving]

How two ends of the waistband are connected together?

[Pyra Gorgon]

look at the pictures.

Three holes. There is only one post, not three

[virginitysaving]

Three holes. There is only one post, not three

Is there separate post or it's part of the lock?

[Pyra Gorgon]

post is part of bracket. lock is the block of metal. locking part is the brass blocking pin that slides into that groove of post

[virginitysaving]

The reason I'm asking because I'm still wondering if this lock could be used together with a my-steel belt.

[Pyra Gorgon]

I dunno, Virginitysaving. Do you have a My-Steel belt?

What makes this clunky lock so nasty is that, while easy to pick, if that @%&^* block to bracket is under tension (I put a rubber shim behind to keep it from rattling, the blocking cylinder pin is impossible to extract out. There is no way you can grab hold of the tip of it and pull it out. The key to the blocking pin (the brass thing) acts as an extraction wrench because once the key unlocks the cylinder it becomes captive. When you pick the cylinder you do not have anything captive in it to use as an extraction device.