Chastity belt liners and mixing bowl with silicon Base

[Tobbe]

Almost everyone has trouble getting the liner attach to stainless steel.
Now I wonder how the manufacturers of bowls, with silicone base attaches them together?

I tested to cut loose the silicone.
No success!
I heat so it bubbles in the silicone and then it come off, but only where it has become so hot.

Can anyone think of how they are doing?

[dashingdarla]

Another option is to use neoprene:

http://www.ebay.com/itm/NEOPRENE-STRIPP ... 2a0e2da3fe

I used 2" wide 1/8" thick neoprene for this project (not shown in pics) :viewtopic.php?f=20&t=409 and I attached it with 3M HS90 spray glue - it ain't coming off

Silicone doesn't breathe, neoprene does. Both can be cleaned, both accept talc, etc.

[cchow340]

I used a 100% silicone glue and eventually found a process that works, its not easy though and takes serious skill.

[Tobbe]

The good news for those who have problems with silicone liner loosen!
Several tried and managed to glue the liner on chastity belts with TEC7!
http://tec7.ie/product/tec7-sealant/